Remote Control Drift Car RC Cars Toy

Description:
A remote control drift car uses the simulation structure, has the control feeling of the real car, and realizes the full-scale continuously variable transmission; front, rear upright spring shock absorption, double wishbone independent suspension system.

Specification:
Number: Q117 (F type)
Configuration: 1/16 Remote Control Drift Car
Material: hardware; electronics; ABS
Product size: about 30*15*10.8 CM/ 11.81*5.91*4.25inch
Remote control size: about 13*7.5*21 CM/5.12*2.95*8.27inch
Color box size: about 32*15*25 CM/12.6*5.91*9.84inch
Body weight: about 800g
Remote control weight: about 170g
Whole set weight (g): about 1450g
Packing: English portable color box
Color: Metallic Blue/Metallic Red
Body: 7.4V 1300mAH Li-ion (T plug)
Handling time: 15-18 minutes (continuous running at full speed)
Charger: USB cable charger
Remote control distance (meters): ≥80 meters
Motor: RC390 high-speed bearing carbon brush strong magnetic (magnetic protection + heat sink) blackened
Servo: 5 wires, 17g
Wheelbase parameters: “Wheelbase: 180mm; Wheelbase: 127mm;
Wheel diameter: 50mm
Differential structure: front and rear nylon gear planetary differential
Remote control battery: 3 “AA” (not included)
Charging time: 3-3.5 hours (USB balanced charge)
Frequency: 2.4GHz (support multiple cars to compete in the same field)
Remote control category: full-scale synchronous control system
ESC: ESC integrated control (-proof)
Speed: 35 km/h
Headlight configuration: Devil Angel Eye headlights (seven modes), taillights
Protection function: 1. Charging; 2. Stuck; 3. High temperature; 4. Low voltage

Packing List:
Vehicle*1
Remote Control*1
Product English Manual*1
Lithium Battery*1
USB Charger*1
Drift Wheel*1
Shock-Absorbing Adjustment Buckle*1
Metal Latch*1
Small Cross Screwdriver*1

Note:
Due to the lighting effects and shooting angles, there is a color difference in the product, please understand.
Due to manual measurement, there is a tolerance in the product size.

See more product details
1.Simulation Structure Design: Adopts simulation structure design and has the control feeling of a real car. This Remote Control Drift Car realizes full-scale continuously variable speed change, high-speed driving, rapid acceleration, deceleration, braking, reversing, left turn, right turn, and drift.

2.Devil Angel Eye Seven Mode Functions: This Drift Car RC has seven modes of devil angel eyes, devil angel eyes running water lights, devil angel eyes on, devil eyes on, angel eyes on, devil running lights, devil angel eyes breathing lights, turn signals (front and rear flashing).

3.Full Proportional Steering: This Drifting RC Car belongs to four-wheel drive, front and rear upright spring shock absorption, double wishbone independent suspension system, full-scale throttle/steering, 2.4G full-scale synchronous remote control system, 2.4G -proof four-way 30A integrated ESC/receiver.

4.Mighty Power: This RC Drifting Car adopts 7.4V, 18650-1300mAh Li-ion, discharge rate 10C (T plug), mighty power, front-wheel cross ball joint drive shaft, rear wheel split dog bone drive shaft.

5.Distinctive Bearings: The car shell uses a high-toughness PVC car shell, front-wheel cross ball joint drive shaft, rear wheel split dog bone drive shaft, this Drift Remote Control Car has a metal second floor, metal front, and rear arm code, and metal middle drive shaft.
</div